Add a Factory
Add a Dyson Sphere
Add a Mecha
Graviton Lens | 300/m From Raw | Fully Proliferated | Very Compact
- Fully Proliferates all intermediate products. Each step compounds, ultimately it uses 3 to 4 times less Raw Resources(e.g. iron ore: 12558/m -> 3190.6/m).
- Creates Proliferator Mk.III locally.
- Design is incredibly dense by using a lot of belt tricks.
- Uses 1210 MW of power(excluding ILS).
- Uses green and blue belts as little as possible.
- Design fits between the equator and the first tropic line.
INPUTS:
- Iron Ore => 3190.6/m
- Copper Ore => 1054.3/m
- Titanium Ore => 152.6/m
- Coal => 610.4/m
- Fire Ice => 718.8/m
-Kimberlite Ore => 535.4/m
OUTPUT:
- Graviton Lens => 300/m
- Hydrogen => 449.3/m
NOTE:
- It takes awhile to start up(~10 min), because the time it takes for the Proliferator Mk.III production to saturate the system.
- Make sure it is powered 100%, otherwise the spray coaters can fail. Which will result in loss of efficiency and production.
- Make sure when you are starting up the factory, you dont mix non-proliferated Sails with proliferated. A small amount of non-proliferated Sails can contaminate a large supply of proliferated Sails.
For the belt bending tricks I followed Ludus's tutorial: video! and used some of his blueprints.
Ratio calculations where done via: factoriolab.github.io
- Creates Proliferator Mk.III locally.
- Design is incredibly dense by using a lot of belt tricks.
- Uses 1210 MW of power(excluding ILS).
- Uses green and blue belts as little as possible.
- Design fits between the equator and the first tropic line.
INPUTS:
- Iron Ore => 3190.6/m
- Copper Ore => 1054.3/m
- Titanium Ore => 152.6/m
- Coal => 610.4/m
- Fire Ice => 718.8/m
-Kimberlite Ore => 535.4/m
OUTPUT:
- Graviton Lens => 300/m
- Hydrogen => 449.3/m
NOTE:
- It takes awhile to start up(~10 min), because the time it takes for the Proliferator Mk.III production to saturate the system.
- Make sure it is powered 100%, otherwise the spray coaters can fail. Which will result in loss of efficiency and production.
- Make sure when you are starting up the factory, you dont mix non-proliferated Sails with proliferated. A small amount of non-proliferated Sails can contaminate a large supply of proliferated Sails.
For the belt bending tricks I followed Ludus's tutorial: video! and used some of his blueprints.
Ratio calculations where done via: factoriolab.github.io
The Preview feature is unavailable at the time.
